OVERVIEW
The long awaited WJ 4-inch Longarm Kit is a comprehensive package including everything needed for a great suspension lift while maintaining the vehicle's crucial center of gravity. Upgrade your WJ and gain aggressive looks, extreme flex, and enough ride height to run up to 31-inch tires. The kit includes adjustable high-clearance X-Flex upper and lower control arms with Clevite bushings, featuringX-Flex joints. The kit also includes front and rear coil springs, a front adjustable track bar with drop bracket, 1/4-inch thick steel crossmember, skid plate and sway bar disconnects. Outfitted with Rough Country's N3 shocks, this Longarm Lift Kit is a total solution comprised of top-notch components designed for the avid off-roader who wants the most out of their WJ.
This top of the line kit focuses on improving off-road handling and articulation while preventing binding and rear steer. This lift kit features high-clearance components with a front 4-link and rear y-link control arm design. This promotes extreme flex while keeping pinion angles optimized. Utilizing adjustable components, this kit can also accommodate future modifications.
FEATURES
Aggressive appearance
Increased ground clearance
HD 0.25" thick crossmember
Lower control arms feature high clearance design
Extreme travel long arms keep optimum alignment and give optimum articulation.
X-Flex control arm features:
Clevite brand OEM style rubber bushings.
Flex joints feature a massive 2.5" diameter body and 1.25" thread.
Fully greasable.
Upper joints pivot up to 20 degrees.
Lower joints pivot up to 35 degrees.
**NOTES - IMPORTANT
Does NOT fit AWD models.**
Models equipped with a CV style front driveshaft may result in driveshaft vibration. If this occurs, replacing the driveshaft, axle yoke and / or transfer case yoke will need to be performed to rid the vehicle of driveline vibration.
VEHICLE FITMENT
YEARS DRIVE MAKE MODEL
1999-2004 4WD Jeep Grand Cherokee WJ
IN THE BOX
FRONT
Lifted coil springs
Adjustable upper control arms
Adjustable lower control arms
Crossmember
Transfer case skid plate
Adjustable track bar
Track bar bracket
Sway-bar quick disconnects
Bumpstop brackets
Brake line brackets
Hardware
REAR
Lifted coil springs
Adjustable y-link upper control arm
Adjustable lower control arms
Long arm frame brackets
Long arm axle mount
Sway-bar brackets
Lower shock brackets
Hardware
SHOCKS
(4) Premium N3 Series
| Est. Install Time | 8-9 hours |
|---|
| Recommended Tire Size | 265/75 R16 |
|---|
| Recommended Wheel Backspacing | Factory |
|---|
