OVERLAND PLUS JL/JT Short Front Upper Control Arms (2 Adjustable Arms)
Over new Overland Plus control arms offer Giiro joints at the frame end, and bolt around the factory axle side bushing. There is a driver side and passenger side arm, so make sure tubing faces in to the center of your Jeep JL/JT. The Giiro Joint is a dual durometer, self centering joint, that is maintenance free.
The outside part of the bushing is softer, to isolate road noise and vibrations and allow the bushing to articulate. It has 13.3 degree of movement in each direction, or 26.6 degrees combined per bushing. The inside area of the bushing is harder and teflon infused to act as a bearing surface for the center pin which is free to twist as the suspension moves up and down. And with our LIFETIME warranty, these are the best and last set of control arms you will need.
These adjustable upper JL/JT arms will work on both a 2dr or 4dr model.
COR-1709101 - JL/JT FRONT UPPERS
Center to Center STOCK = 20.100"
Center to Center MIN = 19.130"
Center to Center MAX = 20.625"
All Clayton Off Road Inc. control arms carry a lifetime, no questions asked warranty against bending or breaking.
Vehicle: JT - Gladiator 20+JL - Wrangler 18+
Product Features:
Adjustable Short Control Arms
Maintenance FREE Giiro Joints
Dual Durometer, Self-Centering Bolt In Design
GIIRO Joints To Isolate Road Noise & Vibration
Lifetime Warranty*
MADE IN THE USA!
